01omd wrote:when fitting the paj sportcluster,do you retain your original speedo klm reading?
bobbiebird wrote:I have fitted a Pajero Sport cluster and am loving it. Has anyone found a work around to get the page button to work.
Cavegod wrote:
Ok great,
ive got the steering switch working apart from the return button, but ive ordered the gateway ecu to see if that solves it. but whats strange is that when i first turned it in i got the mitsubishi animation and revolving car gif on the cluster, but it has never done that since, also in your pictures when does it show the door opening image? Also have you got the image that shows the 4wd mode? I'm hoping that the gateway will do something but as far as im aware it is just to let the ac and stereo talk to the other ecu's in the truck?
Cavegod wrote:Ahh, I have the page button working on the steering wheel but not the return. as far as i can tell the switch just needs an analog ground wereas at the moment i have a common ground. The gateway ecu has this and only requires batt live ign live and earth aswell as 4 can wires connecting, 2 i can grab from steering sensor and the other 2 are connected to the head unit and ac ecu. but on the series 5 the ac ecu is connected to the same canbus as all the other ecus. once it arrives i shall wire it in and see if anything different happens you never know it might translate the ecus for the dash as according to the manual it should have writing under the warnings and not just a picture.
Cavegod wrote:yes i did get water in fuel warning but not since i cut the can wires to the head unit. mine is a 2016 series5 barbarian, the cluster is out of a series 6 barbarian, but from what i can tell itsthe same as the sport. I got the gateway ecu part number from the epc and ordered one from lithuainia. its from a pajero sport butis same part number for l200. Im curious about the start up logo as there is a pause were it should be but doesnt show and like i said it did show the first time i turned it on. the user manual ison the russian site.
Users browsing this forum: No registered users and 13 guests