Longranger1 wrote:R32 apparently is the next big thing in smaller A/C units. Already used as a blend in R410A (50/50 with R125?). Supposedly more efficient. Some units are already being sold with it.
Not sure about some of the new flammable gases. I know the quantity isn't great but a leak in a confined space coupled with an ignition source could spoil your day.
4wd26 wrote:Just read all this thread
My air has gone real warm since being off the road for 5 weeks, really noticeable
It is coldish on driver side but blowing warm air on passenger side, but even the driver side is hopeless- and it was heaps better
Thinking it may have lost gas after sitting- any checks available for levels, do it yourself diagnosis?
Other than that I may have to take the dash apart and see if something has slipped- vent tube?
I have washed out the condenser/ radiator
Need to check the belts
Anything else to check for
fridgie wrote:Is that a dig at me you bastard?
Lunny wrote:mad992 wrote:cmon now you two overpaid filter washers
lmao...
fridgie wrote:Lunny wrote:mad992 wrote:cmon now you two overpaid filter washers
lmao...
Laugh all you want, I just got an 8.5k/yr payrise
Lunny wrote:fridgie wrote:Lunny wrote:[quote="mad992"]cmon now you two overpaid filter washers
lmao...
Laugh all you want, I just got an 8.5k/yr payrise
Naff wrote:Lunny wrote:fridgie wrote:[quote="Lunny"][quote="mad992"]cmon now you two overpaid filter washers
lmao...
Laugh all you want, I just got an 8.5k/yr payrise
rodeddy wrote:hi,
I used the std pipe insulation i got from a air conditioning guy.. I had to cut it in half and slip over the pipe. Fits nicely.
I was going to clark rubber to get some as the stuff they have seems ok too - as long as its not the really cheap foam type , as seen in the pic...
this is the really cheap foam type that had melted from the radiant heat....
this is another pic of the cheap foam type...
this is the better stuff fitted....
Any ideas where I can source some of this in Perth.
cheers, RodGLRkenny wrote:What type of insulation did you end up using rod?
Any pics?
Users browsing this forum: No registered users and 7 guests