RHKTriton wrote:If ! Your various sensors such as MAF, MAP, etc communicated their outputs via the bus, then it may be possible to hook into the data streams. However, the software in the ECU would be quite 'rigid' in its processing, so anything messing up the bus data would generate errors.
The wiring diagrams I've looked at for the Triton and some others all have dedicated ports into the ECU, so reprogramming the core firmware is about the only avenue of attack digitally.
The units would have to have similar abilities to the MUTT unit to be able to alter settings. A constant rewriting of ROM data wouldn't be desirable for a longer period as the chips generally do have a finite read/write cycle count.
So the only way I can see these odb11 units may work is to dump some new settings and that's all.
MilkmanDan wrote:Can do that as its not tune related. Can do idle relearns, turn fans on/off etc with some obd readers
Stoneman wrote:MilkmanDan wrote:Can do that as its not tune related. Can do idle relearns, turn fans on/off etc with some obd readers
yes I know, still interesting
do you have much experience with PID's milkman I have some questions on logging can bus
Stoneman wrote:If someone has the smarts I would love to chat. Just chucking it out there
MilkmanDan wrote:I've edited my post as I felt the way I wrote it was a bit condescending, my apologies stoneman.
What are you looking to do with logging?
Stoneman wrote:Just heads up for anyone looking at the obdII Racechip Galaxy. DONT WASTE YOUR MONEY!
Ive done it and im fighting with them for them to pay return postage
they are happy to accept it may not work on my model but that's for me to find out the hard way in there opinion
Yes I knew what I was buying but you never know and now I can confidently say these are just a scam.
Buyer beware.
Jonty wrote:Good info there TMR and an interesting insight into what's really required
I've tuned a few Evo's using open ECU software (ECUFlash+ EVOScan), but haven't had much luck getting the rom definitions for the Triton as yet. Just bought an MN in December, so was hoping to have a look and play with the tune a little.
Do you know if the rom definitions are out in the public arena somewhere, or is remapping only available by purchasing the more expensive tuning software/licenses such as EcuTek?
gartam wrote:I bought a chip for mine when it had 3500klms on it. I paid $820 for mine and it rockets now. I have just visited my uncle who has a ranger with a dp chip and mine pulls away from his. I still get between 750-800klms around town so I'm very happy.
Users browsing this forum: No registered users and 12 guests