by DibbyDibbyDJ on Sun Nov 08, 2020 7:03 pm
It is possible, but is it worth it?
You would need need to change engine ecu as it will be looking for an auto trans on the can network. The wiring harness would need to be changed to suit. Clutch pedal and cylinder, pipe and slave cylinder.
The ETACS would need to be changed as well, for a manual version, as the network configuration is stored here, and updating its software would need a dealer level scantool
Easier to just get an auto from a wreckers
2024 Outlander
mitsubishi-forums.com